Care

Crafted by artisans, our aluminium has been left untreated, allowing it to age and patina as nature intends. Changes in colour and finish are a natural material response and are not considered a fault.

To reduce tarnishing, use a soft cloth to wipe the surface free of moisture, oils and particles after use, then finish with a metal polishing cloth.

To restore a 'like-new' finish, polish with a Metal Polishing Cloth and buff clean.

Aluminium is a soft metal which can mark if treated poorly.

Our Brass Coasters have been coated with a lacquer to reduce tarnishing and maintain a highly polished appearance. Avoiding harsh chemicals and abrasive textures will prolong the life of the lacquer.

We recommend wiping the surface free of moisture after each use, using a soft absorbent cloth or paper towel. To remove any dried moisture, wipe with a soft microfibre cloth free of any chemicals.

Our Brass Coasters purchased prior to October 2023 were left unlacquered, allowing the brass to age and patina naturally. Changes in colour and finish are a natural material response and require polishing with a brass cleaning agent to maintain a mirror finish. We recommend wiping the coasters free of moisture after each use.

If you would like assistance discerning between finishes, please contact us at studio@coreyashford.com

Crafted by artisans, our brass has been left untreated, allowing it to age and patina naturally. Changes in colour and finish are expected and are not considered a fault.

To reduce tarnishing, use a soft cloth to wipe the surface free of moisture, oils and particles after use, then finish with a metal polishing cloth.

To restore a high-shine finish, polish with a brass cleaning solution and buff clean.

Brass is a soft metal which can mark if treated poorly.

Made from borosilicate glass, the same material used to make laboratory ware, each glass is heat and thermal shock resistant.

Our glassware is dishwasher safe. Please ensure you place glassware on the top shelf, as lightweight glassware can be lifted by strong water jets below.

Avoid dropping ice into an empty glass, as sharp impact may cause the glass to break. Never add ice directly from the refrigerators ice machine.

Gently light your incense stick before placing it snugly in its holder. Ensure your holder is on a stable and heat resistant surface, away from flammable objects.

Make sure the ash lands on a safe, non-flammable surface to avoid markings and discolouration.

Wait until the stick has finished burining and cooled before handling and cleaning up. Do not leave burning incense unattended or within reach of children, pets and away from draughts.

Burning incense creates smoke and ventilating your space after use is recommended.

Cool machine or hand wash with similar colours, using a natural or mild laundry detergent.

Avoid overcrowding the machine, to preventing twisting and pulling on the linen fibres.

Line or tumble dry, ensuring your pieces are still lightly damp before ironing. Be careful not to over-dry your pieces, as it can cause shrinkage and pilling.

The edges of our frayed pieces have been subtly sewn to reduce fraying. Simply cut any additional threads you wish to remove or leave them longer to add to the wabi-sabi finish of the piece.

Marble and travertine are natural stones and need to be treated delicately.

Wipe with a clean, damp cloth.

Food and liquid containing oils, acids or strong pigments can cause markings or discolouration.

Crafted by artisans, our silver plated pieces have been coated in 4 microns of silver to leave a shimmering metallic finish.

To clean, use a soft, non-abrassive cloth to wipe the surface free of oils, moisture and ash.

Avoid metal cleaning agents and hard surfaces, as chemicals, bumps and knocks may cause wear to the plating.